ShreePrati logoShreePrati
Converters

Angle Converter

Convert between angle units — degrees, radians, gradians and turns.

1 ° equals

0.017453 rad

How it works

Enter an angle, pick the units and read the converted value instantly. Ideal for maths, engineering and programming where radians and degrees are used interchangeably.

Common conversions

180 degrees = π radians ≈ 3.14159 rad, 90 degrees = 100 gradians, and a full turn = 360 degrees = 2π radians.

Units you can convert

The converter covers four units. Each one is stored as a fixed number of degrees, and every result is worked out from those values:

  • Degree (°): 1°
  • Radian (rad): 57.29577951°
  • Gradian (grad, also called gon): 0.9°
  • Turn (one full revolution): 360°

How the result is calculated

Your value is multiplied by the size of the starting unit in degrees, then divided by the size of the target unit in degrees: result = value × from-unit ÷ to-unit. For 45° to radians that is 45 × 1 ÷ 57.29577951, which shows as 0.785398 (π/4).

Results are rounded to at most six decimal places and trailing zeros are removed. Very small results switch to scientific notation: 0.0001° in turns appears as 2.777778e-7. Negative angles convert the same way, so −90° becomes −1.570796 rad. Angles larger than a full circle are not wrapped: 720° stays 2 turns instead of becoming 0.

Step by step

  1. Type the angle you want to convert. Decimals and negative values are accepted.
  2. Choose the unit you are converting from.
  3. Choose the unit you want the answer in. The result updates as you type.
  4. Use the swap button to reverse the direction without retyping.
  5. Copy the result to paste it elsewhere, or reset to go back to degrees to radians.

Worked examples

  • 30° = 0.523599 rad (π/6).
  • 90° = 1.570796 rad = 100 grad.
  • 180° = 3.141593 rad.
  • 1 rad = 57.29578° = 63.661977 grad.
  • 0.25 turn = 90°, and 2.5 turns = 900°.
  • 1 turn = 6.283185 rad = 400 grad.
  • 50 grad = 45°.

Where each unit is used

Degrees are the everyday unit for geometry homework, compass bearings, maps and construction drawings. Radians are the natural unit of trigonometry and calculus, and the sine, cosine and tangent functions in most programming languages (for example Math.sin in JavaScript or math.sin in Python) expect radians, so converting degrees first avoids wrong answers in code.

Gradians split a right angle into 100 parts and appear in some surveying work and as the GRAD mode on scientific calculators. Turns are convenient for describing rotations, such as a quarter turn (0.25) or the turn unit accepted by CSS transforms.

Precision and common mistakes

The radian is stored as 57.29577951°, which is 180/π rounded to eight decimal places, so results are accurate to the six decimals shown. Typing a rounded value of π adds its own error: 6.283185 rad shows as 359.999982° rather than 360°. Enter more digits (3.14159265 rad gives 180°) or start from degrees when you need a clean figure.

The most common mistake is mixing calculator modes: sin(30) in radian mode is about −0.988, not 0.5. Degrees, minutes and seconds are not supported, so convert them to decimal degrees first: 30°15′ is 30 + 15 ÷ 60 = 30.25°.

Frequently Asked Questions

One degree equals π/180 ≈ 0.01745 radians. Conversely, one radian ≈ 57.2958 degrees.

Related Tools